Liquid Transfer Angle Valves for Bulk Storage Containers

Designed especially for liquid transfer of LP-Gas from consumer bulk storage containers when used with a Chek-Lok® or equipped with an integral excess flow valve. May also be used for vapor LP-Gas service.


In NH3 applicator tanks they may be used as a vapor bleeder valve or as a liquid withdrawal valve when installed in a coupling with a dip pipe.


These liquid transfer valves are equipped with an integral excess flow valve for liquid transfer directly from the tank fitting, or without an integral excess flow for LP-Gas transfer through a Check-Lok® valve.


When equipped with an integral excess flow valve (7550PX), the valve should be mounted in a forged steel 3000 lb. half coupling. When mounted in a 1¼” x ¾” NPT reducing coupling, the ¾” female thread in this coupling must be full length — equivalent to a forged steel 3000 lb. half coupling.


The excess flow valve will not function properly if these specifications are not met. Refer to the Warning Bulletin in the Excess Flow Valve Section of this catalog.


6 item(s)

VLV ANG .75MPX.75FP - Liquid Transfer Angle Valves for Bulk Storage Containers
Compare
VLV ANG .75MPX.75FP
BRASS ANGLE VALVE,75MPX.75FP 016XS - Liquid Transfer Angle Valves for Bulk Storage Containers
Compare
BRASS ANGLE VALVE,75MPX.75FP 016XS
ANGLE TRANSFER VLV. 3/4  MN X 1/2 FN - Liquid Transfer Angle Valves for Bulk Storage Containers
Compare
ANGLE TRANSFER VLV. 3/4 MN X 1/2 FN
VLV ANG .75MPX.75FP - Liquid Transfer Angle Valves for Bulk Storage Containers
Compare
VLV ANG .75MPX.75FP
3/4
Compare
3/4" STEEL ANGLE TRANSFER VLV w/ XS FLW
ANGLE TRF VLV 3/4MNX1/2FN - Liquid Transfer Angle Valves for Bulk Storage Containers
Compare
ANGLE TRF VLV 3/4MNX1/2FN